Handlebar Mount
1. The camera does not have a
standard tripod mount. For all the
accessories with a 1/4-20 screw,
the camera must be enclosed in
with the waterproof case or in the
included mounting adapter.
2. Turn the waterproof case (or
mounting adapter) clockwise
onto the 1/4-20 screw of the
handlebar clamp until secure.
3. Turn the Locking Wheel so it
applies pressure to the case to keep the connection secure.
4. Loosen the Bar Clamp Bolt until the screw can be pushed
90° upward.
5. The bottom half of the Bar Clamp can be opened to allow
you to wrap the Handlebar Clamp around the actual
handlebar of your bicycle.
6. After positioning the Handlebar Clamp where you want it,
close up the bottom half of the clamp and tighten the Bar
Clamp Bolt.
7. Loosen the Tilt Knob, to adjust for the proper aiming angle;
then tighten the knob.
Panning adjustments can be made by loosening the Locking
Wheel, adjust the pan angle; then tighten the wheel.
1/4-20
SCREW
BAR CLAMP
BOLTS
BAR
CLAMP
LOCKING
WHEEL
TILT
KNOB