www.3sixtgear.com
or visit www.3sixtgear.com/support
3
OPERATION
Charging up your Device
1. Locate the desired output port (3, 4 or 6) on the JetPak Pro LED Power Bank.
2. Make sure that the selected output is clear of obstruction (dirt/dust etc).
3. Locate the desired charging cable you want to charge your device with (Type-C/Micro
USB/Lightning/30 Pin etc).
4. Plug the cable of choice (USB-A or Type-C end) into the desired output port (3, 4 or 6) making sure to
lightly push it in (do not push with excessive force).
5. Plug the cable connector (Type-C/Micro USB/Lightning/30 Pin etc) into your device and push it in
making sure it is connected (do not push with excessive force).
6. Push the Power on/off button (1). The device will then commence charging. A visual/audible
notification will be made via your device if off silent mode.
7. To stop charging simply remove the cable from device or the 3SIXT JetPak Pro LED Power Bank from
the cable and charging will discontinue.
Charging up JetPak Pro LED Power Bank
1. Locate the Micro USB or Type-C input ports (2 or 3) making sure it is clear of dirt/dust.
2. Locate your included charge cable.
3. Connect the USB-A or Type-C connector end into your wall charger.
4. Connect the Micro USB or Type-C connector cable end into the Micro USB or Type-C inputs (2 or 3) on
the 3SIXT JetPak Pro LED Power Bank.
5. Switch wall charger power source on and you will see the percentage Indicator flash individually from
left to right (4) and recommence from the level of charge it is at currently (one flash on/off every
second).
Understanding the LED Indicators
The simple LED percentage read out display will give you a precise momentary representation of the
remaining battery life of your JetPak
Pro LED Power Bank.