8 7 6 5 4 3 2 1
PIN
BOX Network Camera
Making Connec
Ɵ
ons
Before connect this product, please make sure your PC has the LAN port available for connect to the network.
1
Remove the cover of sensor and connect the lens by
screwing it into the camera clockwise.
NOTE:
1. Adjusting lens mount
Please use a C-CS adapter if your
lens is using C Mount.
2. Lens adjustment
Use the hexagonal wrench to release
the lens ring and adjust the lens,
if there is any unfitted condition
occurred after the lens is connected.
* Lock the lens after lens connected by keeping screwing.
It will be idle running if the lens is locked.
Connect lens as shown
2
Making Connections
•PC
•HUB
•MIC
•Wireless Antenna
•Speaker
•IRIS Jack
•Speak
•
•Monitor
•Power
2. MIC In
1. Audio Out
3. Wireless Antenna
10. IRIS Jack
4. POWER LED Indicator
5. RESET Button
6. LAN/POE Socket
7. DC POWER Inlet
8. BNC Connnector
9. Micro SD Card Slot
11. Extension I/O Terminal Block
DESCRIPTION
1. Audio Out
Connect to speaker out.
2. MIC In
Connect to microphone in.
3. Wireless Antenna
Connection to wireless antenna here.
4. Power LED Indicator
The led indicator will light in red when the power on.
5. Reset Button
Reset to factory setting.
6. LAN/POE Socket
Connect to 10/100 RJ45 network / PoE here.
7. DC Power Inlet
Connect to power here.
8. BNC Connector
Connect the monitor to the BNC adapter.
9. Micro SD Card Slot
Insert the micro SD card here.
10. IRIS Jack
Connect the lens cable plug to the IRIS Jack.
11. Extension I/O Terminal Block
TTL alarm and RS485 connection.
The product can operate on DC12V, DC12V/PoE
based on the model you have.The power inlet of the
Network Camera is non-polarized, it can automatically
determine the type of the incoming current.
2
Extension I/O Terminal Block
* Function of Wireless Antenna, TV Out and Auto IRIS are
available only for the models which are supported.
In addition to the motion detection executed by the
internal software application, ths product provides an
extension I/O terminal block which is used to connect
external infrared detectors, beepers and
smoke detectors.
Alarm output
●
High dB alarm
9
●
Alarm
●
Infrared Inductor
Alarm input
Pin Function
Pin Function
1. Alarm In_A
2. Alarm In_K
3. Alarm Out_COM
4. Alarm Out_NC
5. Alarm Out_NO
6. RS485+
7. RS485-
8. DC12V Out
9. GND
* Some function will be different depending on the model.
RMIM-01G05031 Ver:20