9
User’s Manual
wiring is connected to a power supply above 5~36V, the docking station can
keep supplying power to the tablet;
When the Docking station is connected to 8~36V power supply, and the
voltage of the ACC wiring drops from 5~36V to below 4V, the docking station
will continue to supply power to the tablet for one hour, and then stop supplying
power to the tablet. This is to simulate the situation that the car is turned off, to
prevent the tablet from continuing to consume a large amount of vehicle
battery power, resulting in the car not being able to ignite and start;
When the docking station is connected to 8~36V power supply, and the
connection voltage of the ACC wiring is always less than 4V, the docking
station will not supply power to the tablet;
2. Tablet powered via Type-C
The voltage requirement range is 4.75~5.25V, and a 5V/2A power adapter is
recommended.
Note:
The power supply of the docking station has priority over the Type-C power
supply. When both power sources are present, the tablet will automatically
switch to be powered by the docking station.
2.3.2.Checking the Battery Level
a. When the charging is in process, a battery indicator will appear in the status
bar showing the charging percentage. To view the charge percentage, swipe
down the Status Bar and you will see the charging percentage.
b. When the battery is fully charged, you can disconnect the DC input or USB
type-c cable. If available, please keep the device in charging by DC power
supply.
