Technical Specifications
I don’t seem to be receiving many frames per activation.
a) Check the image size and quality. High = less frames. Choose a lower quality. image.
b) Network may be busy.
I can’t dial into the camera – it doesn’t appear as an option for live picture viewing?
a) Camera is switched OFF.
b) Camera has lost network connection. Yellow LED must be constantly lit.
c) Power failure and battery has expired (Note: If camera is in ‘Alarm mode’ when power has failed, you
should receive a text message notification.
d) Server is not recognising the camera. This could be due to subscription issues or service blocking –
contact your service provider.
TROUBLESHOOTING
Before calling the Helpline at the foot of page, try some of the solutions below.
I can’t get video delivered to my mobile handset
Go to the Configure menu, select Communication and switch
POLLING to Off. Depending on the handset this option may have to
be switched to Off. Select Done to exit to Main menu.
For setup and technical assistance please go to www.3rdisecure.tv or call 01443 819328
Page 15
Wired:
No
Wireless:
Yes
Operating Temperature:
0 C to 45 C
Dimensions:
180(h) x 50(d) mm / Base 76mm (dia.)
Weight:
235g
Battery:
Lithium
Working time:
upto 1hour of video transmission capability
Standby time:
5hours
PIR:
Fresnel lens intergrated into Sensor
PIR detection angle:
100
PIR range:
5 metres minimum to 7 metres
Networked:
GSM-850/GSM900/DCS1800 and PCS-1900
IP Rating
IP54
o
o
Comms Menu
Select.....
1 Polling: (On)
0 Done