11
AC Input (A)
The AC INPUT socket (TYPE IEC Grounded) is a required connection for oper-
ating your DREAM SOLO™ at 120V (standard USA household electrical power).
Fuses (B)
The MAINS FUSE requires a 2 AMP fast-acting fuse. This fuse protects your
amplifier from voltage peaks from your power outlet.
The H.T. FUSE requires a 0.5 AMP slow-blow fuse. The H.T. FUSE usually
blows if your power amp tubes are bad to protect the circuit from being damaged.
SAFETY NOTES:
• Always plug your amp into a properly grounded 3 prong AC outlet.
• Never plug your amp into an ungrounded outlet.
• Never remove or break off the 3rd prong safety ground pin from the
power cord.
• Never use a damaged or ungrounded power cord.
• Always use the proper value and type fuse according to the rear-panel
markings.
• Never attempt to replace the fuse while the amplifier is still plugged into
the power source. The fuse should only be replaced when the power cord
has been disconnected from its power source.
A
C
B
Back Panel:
0.25 A
TYPE: 3AG 250V
SLO-BLO
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
SHOCK HAZARD – DO NOT OPEN. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK REPLACE FUSES WITH SAME
TYPE AND RATING. DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TYPE: 3AG 250V
SLO-BLO
A
CAUTION: CHASSIS SURFACE HOT!
16
Ω
8
Ω
4
Ω
NEVER OPERATE WITHOUT
SPEAKERS CONNECTED.
CONNECT SPEAKERS TO ONE
OUTPUT ONLY - 16
Ω,
8
Ω
or 4Ω.
/
DREAM SOLO
™
EFFECTS INSERT
MAX
MIN
SEND
RETURN
SPEAKER OUTPUTS
HybridMASTER
™
D
E
Summary of Contents for DS 1 '62 Brownface
Page 2: ......
