4.5 Calibrating your scanner
Note:
Perform calibration only when white balance needs adjustment.
1. Turn on the scanner by sliding the [POWER] button to ON. Then place the
scanner on the provided “White Balance Calibration” paper.
2. Click and hold onto the [STITCH FILE] button. While holding onto the
[STITCH FILE] button, press the [SCAN] button once and then release both
bottons. SD symbol
will flash and “GREEN” and “RED” LED light will turn
on.
3. Do not move the scanner. Wait until the “RED” LED light turns off. “GREEN”
LED light will stay on.
4. With only the “GREEN” LED light on, start scanning the white paper by sliding
the scanner across the paper until the “GREEN” LED light turns off. (Slide the
scanner backwards if necessary).
5. Slide the [POWER] button to OFF to turn off the scanner. Calibration is
complete.
4.6 Setting the resolution
1. By pressing the [DPI] resolution button on the scanner, you may choose
between high resolution (600 dpi) and low resolution (300 dpi).
2. The high or low resolution mode will be displayed on the LCD screen to reflect
your choice.
4.7 Stitch file
To group scanned files into a new folder within the microSD card use the Stitch
file function.
1. Press the [STITCH FILE] button to create a new folder within the microSD
card for files storage. SF white LED light will turn on.
2. Then scan your documents. Your files will be saved into the new folder.
3. To save another new set of scans in another folder, press the [STITCH FILE]
button again to generate a new folder.
For free optional stitching software, please download the program from the
following link:
http://research.microsoft.com/en-us/um/redmond/groups/ivm/ice/
4.8 How to scan
Note: To scan, make sure your scanner is not connected to the computer.
1. Turn on the scanner by sliding the [POWER] button to ON.
2. Place the document on a flat surface and hold down the document with one
hand.
3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch
onto the paper to ensure the most of the document can be scanned. Make sure
to keep the scanning area in between the scanning width indicator marked on
the side of the scanner.
Summary of Contents for Anyty 3R-HSA651
