Plug in the output jack of the adapter into the power cord jack of
the foot massager on the side of the unit, and then plug in the
adapter into an AC power socket. The buzzer will make a beep
sound and the LED power indicator will start flashing. The foot
massager is now ready for operation.
If you are using the air bag massager for calf and waist, please
plug the input jack of the air bag massager into the output socket
of the foot massager. Then wrap the air bag massager on both
left and right calves, or waist. (As shown in Figure 3)
Operating instructions
1. Turn on the massager by pressing the power button.
The "P" button will start the massager in the factory
default mode (kneading/heating functions are active
and air massage intensity is at the lowest level).
Each time you press a button the buzzer will beep once.
2. In “P” mode: press the air pressure button to choose the next
level of pressure intensity (if the button color is green,
it means first level, if it is yellow, it means second level,
and if it is red, it means third level.) At the same time by pushing
the air pressure button, the buzzer gives as many beeps
3. In manual working mode, press the air pressure button to choose
the next level of pressure intensity (if the button color is green,
it means first level, if it is yellow, it means second level, and if it is
red, it means third level.) Press kneading massage button to
turn the kneading function on and off.
4. Press “heating” button to turn on/off heating function.
5. The massager's auto turn off feature will automatically shut down
the massager after fifteen minutes have passed.
To keep the massager in optimal condition, please follow the correct
usage and pay attention to the following points:
1.Please do not massage area's of the foot where there is trauma or
ulceration.
2.To prevent damage of the massager unit do not apply excessive
force to the top of the unit.
3.People unaccustomed to the massager should avoid prolonged
periods of use until they are more familiar with it.
4.Duration of a single use should not exceed 30 minutes.
5.During operation, if any abnormal event occurs, such as overheating
or strange odors being released, please stop using the unit immediately
and turn off the massager.
6.After each use, please switch off the power by pressing “Power”
button on the control panel first, and then disconnecting the power plug
from AC outlet. To prevent damage disconnect the massager by pulling
on the plug and not the power cord.
7.Please always unplug the adapter from the AC power jacket before
cleaning the product.
8.Please use wet and soft cotton sheet and neutral detergent to clean
the massager.
9.Please don't drag or pull the power cord of the massager.
10.Please don't use the massager in water or in a humid environment.
If the massager falls in water accidentally, please unplug the power
plug from the socket immediately, before taking it out from the water.
11.To prevent overheating please don't cover the product with a
pillow or blanket, when you are using it.
12.Please do not use anything to cover the massager, when using it,
because it can cause malfunction or damage.
13.Please don't use the massager near stoves or any other heat sources.
14.Only use original accessories or parts from the manufacturer of
this massager.
15.Avoid detaching or dismantling of the massager for self repair.
Doing so can be dangerous and will void the guarantee and warranty
for the after sales service.
16.For your personal safety and the proper operation of this massager,
please do not open the zipper. We will be not responsible for any
consequences caused by such interaction.
17.If you are receiving medical treatment or you are having any of the
following diagnoses below, please consult your physician and use the
appliance in accordance with your doctor's orders.
Product maintenance and warnings
4
3
1
2
3
4
5
Figure 3
