Control Panel
Instruction
Operation Instruction
Automatic
Working
Mode
Manual Working Mode
Product Maintenance and Attentions
1.Please do not massage the area on the foot where there is
trauma or ulceration.
2.To prevent overload of the massage, please don't stand on
it or sit on it.
3. For new users continuous use is not recommended. The time
should be increased after you have adapted to it.
4. A duration of 30 minutes or less per session is recommended.
1. Kneading: Toggles kneading function on and
off when in manual mode
2. Air Pressure: Switches between three levels
of air pressure when in manual mode
3. Auto: Selects between the two automatic modes
4. Heating: Adjust between low and high
temperature when in either mode
5. Power: Turns massager on and off
Plug output jack of adapter into power cord jack of the foot
massager then plug input jack of the adapter into an AC power
outlet. A flashing LED indicator and a buzzer indicates
that the
massager is operational.
1. Press the power button and the massager will start up in
automatic mode A. The left indicator LED, Kneading LED and
air massage LEDs will be on.
The following functions will be enabled:
a.Combination of air pressure massage with kneading function
b.Air pressure massage function
c.Kneading Massage function
the three functions above will cycle for 15 minutes before
automatic shut down occurs.
2. Pressing the auto button again will change to automatic mode b.
The following functions will be enabled:
a. Air pressure massage function
b. Kneading massage function
c. Combination of air massage with kneading function
*
3. Pressing the auto button again will change to manual mode.
The following functions will be enabled:
a. Pressing the Kneading Button will toggle the kneading
function on and off
b. Pressing the Air Massage Button will select between three
intensity levels as indicated by the LED
color (green, yellow,
red)
c. Pressing the Heat button will alternate between low and high
temperature
The
massager
'
s
auto
shutdown
function
will
activate
after
15
minutes
.
This
will
turn
off
the
massager
.
*
Heat insensitive users should pay attention to the
surface of the application.
the three functions above will cycle for 15 minutes before
automatic
shut down occurs.
*
