3onedata MES600 Series User Manual Download Page 53

Page: 53 / 76

Industrial Ethernet Switch User Manual

3onedata proprietary and confidential

Please provide the host IP of POP3 mail delivery service or the host name to our

device

Sender

E-mail account is used to login to e-mail server.

Password

E-mail password.

Receiver

Recipient to solve the problem of abnormal events hoping to find a contact e-mail

address

Mail Interval

Regularly send log interval time

10.3 Relay alarm

Warning had 2 types: Power alarm, port alarm. Main function: once the devices were

in unusual status, can inform administrator in time and repair the status of device

quickly, can avoid more lose

Relay warning input type: Close/Open. Once select close, the light will be bright when

alarms have. Relay will be in open status.

Power alarm

Switch provided dual DC power supply (AC power supply did not have alarm), if one

power supply had problem, another will support power supply immediately, dual

power supply hot back-up. Select to enable power alarm, If power supply was in

unusual status, device will send alarm signal, inform power supply work unusual.

Port Alarm

Alarm when port disconnects. Enable port alarm, if port was in unusual status

(Connect or disconnect), device will output a signal, inform the device work unusual.

Summary of Contents for MES600 Series













































































Search results

Summary of Contents for MES600 Series

Reviews:

Related manuals for MES600 Series

Brands by name

Popular brands

3onedata MES600 Series, User Manual

Search results

Summary of Contents for MES600 Series

Reviews:

Related manuals for MES600 Series

Brands by name

Popular brands