【
Logging in to WEB Interface
】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device
’s configuration interface via IE
browser is shown as below:
Configure the IP addresses of computer and the
Step 1
device to the same network segment, and the
network between them can be mutually accessed.
Enter device
’s IP address in the address bar of the
Step 2
computer browser.
Enter device
’s username and password in the login
Step 3
window as shown below.
Click
“OK” button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is “192.168.1.254”.
The default username and password of the device is
“admin”.
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
100M copper port
10/100Base-T(X) RJ45,
automatic flow control, full/half
duplex mode, MDI/MDI-X
autotunning
100M POE copper port
10/100Base-T(X) RJ45,
automatic flow control, full/half
duplex mode, MDI/MDI-X
autotunning, POE port, output
power of 15W or 30W.
Gigabit Combo port
10/100/1000Base-T(X) or
1000Base-SFP
POE pins
V+, V+, V-, V- are corresponding
to the pins 1, 2, 3, 6
Console port
CLI command management port
(RS-232), RJ45
Alarm interface
2 pins 7.62mm pitch terminal,
support 1 channel relay alarm
information output, current
loading capability is 1A@24VDC
or 0.5A@120VAC
Indicator
Power indicator, running
indicator, interface indicator,
PoE indicator and alarm
indicator
Exchange attributes
Backplane bandwidth
7.6G
Packet buffer size
1Mbit
MAC table size
8K
Power supply
Input power supply
DC power supply 48VDC
Support DC dual power supply
redundancy and anti-reverse
connection
Access terminal
4-pin 7.62mm pitch terminal
blocks
Consumption
Model I
No-load: 4.3W@48VDC
Full-load: 123.6W@48VDC
Model II
No-load: 8.9W@48VDC
Full-load: 114.4W@48VDC
Environmental limits
Working temperature
-40
℃
~75
℃
Storage temperature
-40
℃
~75
℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)