Click “OK” button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is “192.168.1.254”.
The default username and password of the device is
“admin”.
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
Gigabit SFP
1000Base-SFP, SFP slot
100M copper port
10/100Base-T(X) self-adapting
RJ45 port, full/half duplex
self-adaption or specified
operating mode,
support
MDI/MDI-X self-adaption
Console port
CLI command management port
(RS-232), RJ45
Alarm interface
2 pins 7.62mm pitch terminal
blocks, support 1 channel relay
alarm information output, current
loading ability is 1A@24VDC or
0.5A@120VAC
Indicator
Power indicator, running
indicator, interface indicator,
alarm indicator
Switch property
Backplane bandwidth
7.6G
Packet buffer size
1Mbit
MAC table size
8K
Power supply
Input power supply
12~48VDC
Support dual power supply
redundancy, non-polarity and
anti-reverse connection
Access terminal
4 pins 7.62mm pitch terminal
blocks
Consumption
No-load
≤
2.2W@24VDC
Full-load
≤
5.5W@24VDC
Environmental Limits
Working temperature
-40
℃
~75
℃
Storage temperature
-40
℃
~85
℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)
