【
Specification
】
Panel
Gigabit copper port
10/100/1000Base-T(X)
self-adaption, RJ45, full/half
duplex, MDI/MDI-X
self-adaption
Gigabit PoE port
10/100/1000Base-T(X)
self-adaption, RJ45, Full/Half
Duplex, MDI/ MDI-X
self-adaption. The single port
supports 15.4W PoE output
power of IEEE802.3af standard
and 30W PoE+ output power of
IEEE802.3at standard, power
supply pin: 1/2-, 3/6+
Gigabit SFP slot
100/1000Base-X self-adaption
or forced mode, SFP slot
2.5G SFP slot
100/1000/2.5GBase-X
self-adaption or forced mode,
SFP slot
LED digital tube
1 seven-segment LED digital
tube, which shows the running
status of the device
USB interface
USB2.0 Type-A(Female),
download logs and
configuration files, or upload
configuration files
I/O port
Support 2 inputs and 2 outputs,
8-pin 3.81mm pitch terminal
blocks, support dry contact input
and relay-type output
Console port
CLI command management
port (RS-232), RJ45
Alarm interface
6-pin 5.08mm pitch terminal
blocks, the alarm occupies 2
pins, support 1 relay alarm
information output, the current
load capacity is 1A@30VDC or
0 3A@125VAC
Indicator
Running Indicator, Alarm
Indicator, Power Supply
Indicator, Interface Indicator,
PoE Indicator
Switch Property
Backplane bandwidth
58G
Packet buffer size
4Mbit
MAC Address Table
8K
Power Supply
Model I, Model IV
24~48VDC
(12~55VDC),
support anti-reverse connection
Model II, Model V
48VDC (44~55VDC), support
anti-reverse connection
Model III, Model VI
110/220VAC
（
85~256VAC/DC
）
Access terminal block
6-pin 5.08mm pitch terminal
blocks (power supply occupies
4 pins)
Power Consumption
Full-load
＜
240W (with PD load)
Working Environment
Working temperature
-40~75
℃
Storage temperature
-40~85
℃
Working humidity
5%
～
95% (no condensation)
Protection grade
IP40 (metal shell)
【
Disposal of Waste Electrical and Electronic
Equipment (WEEE 2012/19/EU)
】
(Applicable in the EU-member states)
The crossed-out wheeled bin
symbol on the equipment or its
packaging indicates that the
product, at the end of its service life,
shall not be mixed with unsorted
municipal waste but should be
collected separately, in accordance
with local laws and regulations.
A proper separate collection of end-of-life equipment for the
subsequent recycling, treatment and environmentally
compatible disposal, will help prevent potential damage to the
environment and human health, facilitating the reuse,
recycling and/or recovery of its component materials.
Private users should contact their vendor or municipal waste
management service and ask for disposal information.
Professional users should contact their suppliers and check
the terms of their selling agreement.
This product must not be disposed of with other commercial
waste.
Users’ cooperation in the correct disposal of this product will
contribute to saving valuable resources and protecting the
environment.
