Power input voltage: 220VAC (85~264VAC).
【
PoE Power Supply Pin Connection
】
PoE port is powered by the following pins.
Pin
1
2
3
6
Definition V+
V+
V-
V-
【
Checking LED Indicator
】
The function of each LED is described in the table as
below:
LED
Status
Description
P1/P2/PWR
ON
Power supply is connected
and running normally
OFF
Power supply is
disconnected and running
abnormally.
ALM
ON
Reserved
OFF
Reserved
RUN
ON
The device is powered on
or the device is abnormal.
OFF
The device is powered off
or the device is abnormal.
Blinking
System is running well.
Link/Act
(1-16,
G1-G4)
ON
Ethernet port connection is
active.
Blinking
Data transmitted
OFF
Ethernet port connection is
inactive.
POE (1-8/16)
ON
POE port supply electricity
for other devices normally
OFF
POE is disabled or
disconnected
【
Specification
】
Panel
100M POE copper port
10/100 Base-T(X) RJ45,
automatic flow control,
full/half duplex mode,
MDI/MDI-X autotunning,
POE port, the output power
consumption is 15W or 30W.
100M copper port
10/100 Base-T(X) RJ45,
automatic flow control,
full/half duplex mode,
MDI/MDI-X autotunning
POE pins
V+, V+, V-, V- are
corresponding to 1, 2, 3, 6.
Gigabit SFP
1000Base-SFP
Console port
Reserved
Alarm interface
Reserved
Indicator
Run indicator, interface
indicator power indicator,
alarm indicator (reserved),
PoE indicator
Exchange attributes
Backplane bandwidth
12.8G
Packet buffer size
3Mbit
MAC table size
8K
Power supply
Input power supply
Power supply input voltage:
48VDC, 24VDC, 220VAC
Support DC dual power
supply redundancy,
anti-reverse
Access terminal
6-pin 5.08mm pitch terminal
blocks, including 4-pin
power supply terminal
blocks
Consumption
DC products
No-load consumption
≤157W@48VDC
Full-load consumption
≤157.2W@48VDC
AC products
No-load consumption
≤9.2W@220VAC
Full-load consumption
≤9.6W@220VAC
Working environment
Working temperature
-40~75
℃
Storage temperature
-40~85
℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)
1
8
