ES208G
Unmanaged Ethernet Switch Quick
Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District,
Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check whether the package and accessories are intact
while using the switch for the first time.
1. Industrial Ethernet switch
2. Certification
3. Quick installation guide
4. Warranty card
5. DIN-Rail mounting attachment
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
The product is 8-port full Gigabit layer 2 unmanaged Ethernet
switch. Model as follows: ES208G (8 Gigabit copper ports).
【
Panel Design
】
Top view, Bottom view and Rear view
Front view and Side view
1.
Grounding screw (protective grounding)
2.
Power input terminal block
3.
DIN-Rail mounting kit
4.
10/100/1000Base-T(X) Ethernet port
5.
PWR indicator
6.
Ethernet port connection or active status indicator
【
Mounting Dimension
】
Unit: mm
Attention before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
DIN-Rail Mounting
】
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below:
