10Base-T/100Base-TX/1000 Base-TX Ethernet port use in
front panel, It is RJ45 port, the PIN define of RJ45 is as follows:
connection adopt UTP or STP, the distance is no more than 100m,
1000Mbps use cat5e, 100Mbps use cat5, 10Mbps use cat3,4, 5.
RJ45 port support MDI/MDI-X self-adaption. In (MDI),
PIN1, 2, 3, 4, 5, 6, 7, 8 connect corresponding, in (MDI-X)
PIN1→3, 2→6, 3→1, 6→2, 4→7, 5→8, 7→4, 8→5. In
MDI/MDI-X, 1000 Base-TX PIN define is as follows:
Note
：“
TX
±”
Transmit Data
±，“
RX
±”
Receive Data
±，“—”
Not Use
。
MDI (straight-through cable):
MDI-X (Cross over cable)
MDI/MDI-X auto connection makes switch easy to use for
customers without considering the type of network cable.
【
LED Indicator
】
The POE Switch indictor light on the front panel. the function of
each LED is described in the table as below.
LED
Indicat
or
Description
PWR
ON
Power connection regularly
OFF
Power supply have no connection or
unwonted
Sys
Blinking
Software running in the CPU
Destroy/
normall
y on
The software runs abnormally in the CPU
Link/A
CT
ON
Established effective network connection
Flashing
Network in activity statues
OFF
Did not established effective network
connection
Yellow
The 10/100M ports auto-negotiate
connected
Green
The 1000Mbps ports auto-negotiate
connected
POE
ON
The POE function works
Flashing
The POE ports failed to work or the PDs
are overloaded
【
Installation
】
Operation Cautions
1)
Don’t stock the device in damp environment or near
water, to avoid water or moisture penetrating into the
inner device.
2)
Don’t put the device on a unstable box or desk, the
device will get damaged from falling.
3)
Please check and make sure the operation voltage is
meet the voltage standard marked on the device surface
before the next steps.
4)
Please use a grounded three-hole power socket in the
rack or desk mounting, to mitigate damage caused by
electro-static discharge or lightning stoke.
5)
Keep the device far from heat sources, strong power
radio transmitters and radar transmitters.
6)
Similar with other electrical products, the semiconductor
chip in device will get damaged when open and shut off
the power frequently. Please restart the device 3~5
seconds(or longer) after the power is shut off.
7)
Please pull out the power plug before cleaning the
device. Don’t wipe the device with wet cloth or clean the
device with liquid.
8)
To guarantee a long operation life, the device can only
be used in indoor and in ventilated & dry environment.
And to get a good heat dissipation, please reserve a
space over 10CM around the device.
Rack Mounting
PIN
10/100Mbps
1000Mbps
MDI
MDI-X
MDI
MDI-X
1
TX+
RX+
BI_DA+/TX+
BI_DB+/RX+
2
TX-
RX-
BI_DA-/TX-
BI_DB-/RX-
3
RX+
TX+
BI_DB+/RX+
BI_DA+/TX+
4
-
-
BI_DC+/
—
BI_DD+/
—
5
BI_DC-/
—
BI_DD-/
—
6
RX-
TX-
BI_DB-/RX-
BI_DA-/TX-
7
-
-
BI_DD+/
—
BI_DC+/
—
8
-
-
BI_DD-/
—
BI_DC-/
—
1
8
