E232 Protocol Converter
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check the integrity of package and accessories while
first using the product.
1
.
Protocol Converter
2
.
B25 male head to DB9
female head cable
3 Quick installation guide 4 Certification
5 Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
The product is an RS-232 port to E1 converter. Model is E232
(1 RS-232 port +1 E1 interface).
【
Panel Design
】
Front view
Rear View
1.
E1-
75 Ω Wan unbalanced input interface
2.
E1-
120 Ω Wan balance input and output interface
3.
E1-
75 Ω Wan unbalanced output interface
4.
DIP switch
5.
RS-232 serial port
6.
220VAC terminal block for power input
7.
Power supply switch
8.
Power indicator
9.
Losing synchronization alarm indicator
10.
Upstream E1 link full 1 code alarm indicator
11.
E1 link interrupt alarm indicator
12.
Receive data indicator from G.703 network
13.
Send data indicator to G.703 network
【
Mounting Dimension
】
Unit: mm
Notice before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
Power Supply Connection
】
AC power input
The device supports 1 AC power input, adopts
3-hole socket and is equipped with AC power
switch. Power supply range: 220VAC.
Notice:
Power ON operation: First insert the power supply
terminal block into the device power supply interface,
and then plug the power supply plug contact and power
on.
Power OFF operation: First, remove the power plug,
