3nStar SC430, Programing Manual

Page: 42 / 53

42
Please check the corresponding data code table
(3) For the content that needs to be added for one scan, please find the ASCII code table
(4) Finally scan the setting code "Saved and Finished Set".
For example: the original barcode content is "ABCDEFGHIJKLMN";
The content after adding the prefix is ""ABCDE12345FGHIJKLMN"".
1. Scan the setting code "Add Suffix Setting"
2. In the original bar code, the suffix "12345" is added after the character ‘E’, while the original
bar code
The position of the code content ‘E’ is the 10th last character, so the data code "XX"
For "1", "0", look up the data code table, and scan the barcode corresponding to the data code in
turn.
3. The content added in the original bar code is "12345", a total of 5 characters. Find ASCII
Code table, characters "1", "2", "3", "4", "5", corresponding to ASCII code in turn
"31", "32", "33", "34", "35", and scan the corresponding barcode in turn
4. Finally scan the setting code "Saved and Finished Set".
Remarks: Only operate (1) and (4), you can also clear the contents of adding suffixes or restoring
the factory.
Hiding front character shortcut setting
Hide the first 1 bit
Hide the first 2 bits
Hide the first 3 bits
Hide the first 4 bits