3nStar SC050, Programming Manual

Page: 14 / 113

8
2.4 Quick command (HEX format)
Quick command can be used in the following conditions:
Message Source=0x04 (PC or Industrial Computer);
Message target=0x31 (barcode scanner 0x31);
Beeper=0xFF (Closed).
Table 2.4-1 Host to Scanner
Function Command(HEX format)
Common command:
Save & Exit (%END) 0A 04 31 00 24 25 45 4E 44 FF FD A2
Trigger scan (LT) 08 04 31 00 26 4C 54 FF FD FE
Stop scan (LS) 08 04 31 00 27 4C 53 FF FD FE
Restore factory default (DF) 08 04 31 00 28 44 46 FF FE 12
Restore user default (DC) 08 04 31 00 29 44 43 FF FE 14
Write user default (WC) 08 04 31 00 2A 57 43 FF FE 00
Read product batch version (RV) 08 04 31 00 2B 52 56 FF FD F1
Modify parameter command:
Single read (F0000) 0B 04 31 00 50 46 30 30 30 30 FF FD 6B
Continuous read (F0001) 0B 04 31 00 50 46 30 30 30 31 FF FD 6A
Disable repeat read (F0100) 0B 04 31 00 50 46 30 31 30 30 FF FD 6A
Enable repeat read (F0101) 0B 04 31 00 50 46 30 31 30 31 FF FD 69
Multiple read (F0102) 0B 04 31 00 50 46 30 31 30 32 FF FD 68
TTL/RS232 output (A0000) 0B 04 31 00 50 41 30 30 30 30 FF FD 70
USB HID Keyboard output (A0001) 0B 04 31 00 50 41 30 30 30 31 FF FD 6F
Disable respond (E0000) 0B 04 31 00 50 45 30 30 30 30 FF FD 6C
Enable respond (E0001) 0B 04 31 00 50 45 30 30 30 31 FF FD 6B
Disable transmit NR (G0000) 0B 04 31 00 50 47 30 30 30 30 FF FD 6A
Enable transmit NR (G0001) 0B 04 31 00 50 47 30 30 30 31 FF FD 69
Enable transmit NR (protocol) (G0002) 0B 04 31 00 50 47 30 30 30 32 FF FD 68
Disable read all barcodes (I1000) 0B 04 31 00 50 49 31 30 30 30 FF FD 67
Enable read all barcodes (I1001) 0B 04 31 00 50 49 31 30 30 31 FF FD 66
Table 2.4-2 Scanner to Host
Function Command(HEX format)
Respond if setting succeed 07 31 04 00 01 06 FF FE BE
Respond if setting fail 07 31 04 00 01 15 FF FE AF
Enable transmit NR (protocol) 08 31 04 00 02 4E 52 FF FE 22