3nStar BC1005, Technical & Service Manual

Page: 2 / 8

ERROR CODE & SOLUTIONS
Self Detection Problem Reason Solution
E-26 Left Counting Sensor Page 1
E-27 Right Counting Sensor Page 1
E-32 Speed Sensor Page 1
E-30 Stacker Sensor Page 2
E-29 Hopper/Fedding Sensor Page 2
Alarm Codes Meaning
E-17 UV Detection Page 2
E-18 MG Detection Page 2
E-11 Double Note Detection Page 2
E-23 Chain Note Detection
Page 2
E-22 Slant Note Detection Page 2
E-15 Dimension Detection Page 3
E-33 Half Note Detection Page 3
E-10 Jam Detection Page 3
SELF DETECTION CODES:
E26
1. Please check if counting sensor’s plug is well connected to mainboard?
2. If it is well connected, please change the mainboard (with normal mainboard).
3. If normal mainboard has been changed but still not working, then change left
counting sensor.
E27
1. Please check if counting sensor’s plug is well connected to mainboard?
2. If it is well connected, please change the mainboard (with normal mainboard).
3. If normal mainboard has been changed but still not working, then change right
counting sensor.
E32
1. Please check if speed sensor’s plug is well connected to mainboard?
2. If it is well connected, please change the speed sensor (with normal sensor).
3. Check disk and make sure it is not deformed. If it is deformed, please change
the disk.
4. If still not working, then change mainboard.