3M™
Digital
Projector X64w Product Safety Guide
© 3M 200
8
7
ENGLISH
CAUTION
•
To reduce the risk associated with environmental contamination:
-
Dispose of exhausted batteries in accordance with applicable federal, state, and
local regulations.
•
To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
-
Use only with battery type AA (HITACHI MAXELL Part No.LR6 or R6P), HITACHI
MAXELL Part No.CR2032.
-
Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control or internal clock battery case.
-
Do not leave the battery in the remote for an extended period of time.
'RQRWKHDWGLVDVVHPEOHVKRUWUHFKDUJHRUH[SRVHWR¿UHRUKLJKWHPSHUDWXUH
-
Do not carry batteries loose in your pocket or purse.
-
Avoid eye and skin contact in the event that battery would leak.
-
Do not mix used and new batteries.
-
Obey the local laws on disposing the battery.
•
To reduce the risk associated with the impact of a falling projector:
-
Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
mounting is desired.
,QVWDOODWLRQRIWKH0ZDOOFHLOLQJNLWPXVWRQO\EHSHUIRUPHGE\TXDOL¿HGSHUVRQQHO
-
Adhere strictly to the proper installation procedure as outlined in the installation
instructions when installing the 3M™ wall/ceiling kit.
$OZD\VRSHUDWHWKHXQLWRQDÀDWVWXUG\DQGKRUL]RQWDOVXUIDFH
•
To reduce the risk associated with intense visible light:
-
Avoid looking directly into the projector lens while the lamp is on.
•
To reduce the risk associated with tripping and/or impact:
-
Position the power cord and data cable so that they cannot be tripped over.
