Technical Update
3M™ Wheel Weight System TN2000 – Safety and Instructions
Page 5 of 8
3M™ Dual Box Holder Kit TN222 (PN99428) and 3M™
Dual Cutter Bracket TN211 (PN99429)
Set-Up and
Instructions
1)
Remove 3M™ Universal Cutter
TN201 (PN61479) from the 3M™
Cutting Stand TN252 (PN61480).
Loosen socket head cap screws
(A), with a 5/32” allen wrench and
remove. Set cap screws aside for
later use. Remove metal collar
from tube with a 3/16” allen
wrench. Recycle metal collar.
2)
Insert dual cutter bracket onto blue
stand orienting roughly as shown in
photo, with hex nuts facing rear
and cutter slots oriented horizontal
to floor. Tighten hex nuts with
7/16” box wrench. This may need
to be adjusted later for operator
comfort.
3)
From the bottom side of the
bracket, insert one cutter into the
right side slot as shown. Secure
with two supplied socket head cap
screws (A) using a 5/32” allen
wrench as shown.
