Wheel Weight System TN2000
Safety and Set-Up Instructions for the 3M™ Cutting Stand
TN252 (PN61480), 3M™ Universal Cutter TN201 (PN61479),
3M™ Dual Box Holder Kit TN222 (PN99428) and 3M™ Dual
Cutter Bracket TN211 (PN99429)
Technical Bulletin
November 2008
Safety Statement
Read, understand and follow all safety information contained in these instructions
prior to setup and operation of the 3M™ Cutting Stand TN252 (PN61480), 3M™
Universal Cutter TN201 (PN61479), 3M™ Dual Box Holder Kit TN222
(PN99428), and the 3M™ Dual Cutter Bracket TN211 (PN99429) for the 3M™
Wheel Weight System TN2000. Retain these instructions for future reference.
Intended Use
The 3M Cutting Stand TN252 (PN61480) and 3M Universal Cutter TN201
(PN61479) are intended for use in handling, feeding, measuring and cutting
required lengths of 3M™ Wheel Weight TN2015 (PN61403), TN2023 (PN61405)
and TN4014 (PN99427) roll goods for use in the balancing of automotive wheels.
The 3M™ Wheel Weight System TN2000 is used in a commercial environment by
trained personnel.
The 3M Wheel Weight System must be set up and operated in the commercial
automotive environment as intended. It has not been evaluated for other uses
or locations.
Safety
EXPLANATION OF SIGNAL WORD CONSEQUENCES
WARNING:
Indicates a potentially hazardous situation, which, if
not avoided, could result in death or serious injury
and/or property damage.
CAUTION:
Indicates a potentially hazardous situation, which, if
not avoided, may result in minor or moderate injury
and/or property damage.
