3M Speedglas 9000XF, User Instructions, Page: 5 / 13

5
3M™ Speedglas ™ FlexView Replacement Parts
04-0026-00 3M™ Speedglas™ Headband Pivot "S" Stop (Right), package of 10
04-0126-00 3M™ Speedglas™ FlexView Headband Pivot "S" Stop (Left), package of 10
04-0116-00 3M™ Speedglas™ FlexView Inner Shell
04-0116-00SW 3M™ Speedglas™ FlexView Inner Shell with SideWindows
04-0260-00
3M™ Speedglas™ FlexView Protection Plate, package of 10
04-0361-00 3M™ Speedglas™ FlexView Middle Headgear Panel
04-0360-00 3M™ FlexView Welding Auto-Darkening Filter Holder
04-0216-00 3M™ Speedglas™ FlexView Front Panel
ADJUSTMENT OF HELMET & VIEWING POSITION
1) Adjust the overhead band to one of the custom fit positions for proper shield depth and to ensure balance and
stability (Figure 1). The headband also has a ratcheted knob to increase or decrease its circumference.
2) Check for proper viewing position. The recommended viewing angle between the face and shield is 10° to 12°
(Figure 2). To adjust the viewing angle, follow step 3.
3) Position the headband pivot stop so the peg on the side of the welding helmet (Figure 3) goes through one of the
slots in the stop to obtain the desired viewing angle.
ADF FUNCTION
ON/OFF Operation
To turn the ADF on, simply press the ON button. The ADF automatically turns off 60 minutes after the last arc
(30 minutes for the Utility and 9000XF models). The ADF can also be turned off manually by pressing the ON