3M Ranger 145, Operator'S Manual

Page: 19 / 24

Maintenance and Storage 15
202041B
Cleaning the Ranger pressure infusor unit
Clean the Ranger pressure infusor unit on an as-needed basis or per institutional protocol.
To clean the outside of the unit
1. Disconnect the Ranger pressure infusor unit from the power source.
2. Wipe the outside of the unit with warm, soapy water, nonabrasive cleaning solutions, diluted bleach, or cold sterilants. Do not
use abrasive materials. Contact 3M Patient Warming technical support for a complete list of approved cleaning solutions.
3. Wipe with a dry, soft cloth.
Cautions
• Do not immerse the pressure infusor in cleaning or disinfecting solutions. The unit is not liquid proof.
• Do not clean the pressure infusor with solvents. Damage to the case, label, and internal components may result.
Storage
Cover and store all components in a cool, dry place when not in use. Take care not to drop or jar the unit.
Section 5: Maintenance and Storage