WARRANTY AND LIMITED REMEDY
EN
3M Instruction Manual
5
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the
applicable specifi cations at the time 3M ships the product. Individual products may have additional or diff erent warranties as stated on product literature, package
inserts or product packages.
3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE
OF TRADE.
User is responsible for determining whether the 3M product is fi t for a particular purpose and suitable for user’s application. If the 3M product is
defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to repair or replace the product or
refund the purchase price.
LIMITATION OF LIABILITY
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental
or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
SUBMITTING A WARRANTY CLAIM
Contact your dealer when submitting a warranty claim in accordance with the restrictions listed above. Please note that all warranty claims are subject to
manufacturer’s approval. Be sure to keep your sales receipt and Product Inspection Certifi cate in a safe place. These must be submitted when fi ling a
warranty claim.
PRODUCT REPAIR AFTER WARRANTY HAS EXPIRED
3M has established local corporations with authorised repair and service centres. Please contact your distributor who will be able to arrange repair and servicing to
off er you the best service.
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage in Volts (V).
3. Working frequency in Hertz (Hz).
4. Absorbed current in Amperes (A). Ensure that the power supply to which
the tool is connected can easily tolerate the indicated current as a minimum.
5. Absorbed power expressed in Watts (W).
6. Tool code or serial number.
7. Technical data of the tool.
8. Maximum rpm
9. The double square indicates that the tool is doubly insulated and therefore
does not require earthing through the power supply cable.
10. Read all these instructions before operating this product and save these instructions.
11. Personal Protective Equipment.
12. Please recycle. Do not dispose in household waste (see also under Cautions)
75-078_ROSander.indd 7
75-078_ROSander.indd 7
12.03.2010 12:45:56
12.03.2010 12:45:56
