Downloaded from Projector.com
Optional Video Module
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes
before replacing the lamp.
To reduce the risk of cuts to fingers and damage to internal components, use cau-
tion when removing lamp glass that has shattered into sharp pieces.
To reduce the risk of cuts to fingers and/or decreasing image quality by touching the
lens, do not touch the empty lamp compartment when the lamp has been removed.
This lamp contains mercury. Consult your local hazardous waste regulations and
dispose of this lamp in a proper manner.
Resetting Lamp Hours
If you replace the lamp after 1500 hours of operation, please proceed as follows
within 10 minutes of powering on.
OSD
FUNCTION
Press the Exit button on the projector
or the remote control for 3 seconds to
display the total used lamp time.
Press the MENU button on the
projector or the remote control during
the lamp hour message. An
adjustment message will appear.
•
Press
9
or
:
to select the setting.
To select the default setting, select
“Reset” (or “Cancel” to return to the
default setting).
•
Press EXIT to leave.
24
3M
™
Personal Projector MP7720
© 3M IPC 2000
Table of Contents
