background image

9

Squelch (hiss reduction)  

The “Squelch” feature will reduce the distracting radio hiss or static noise.  You can choose between five squelch levels by 

pressing the (+) button (A:11) or (–) button (A:12).  A higher squelch level will further reduce the noise, but will also reduce 

your range of reception.  To switch this function off, press the (–) button for two seconds.  Press the (+) button to switch this 

function back on. 

Sub channel (selective squelch) 

The Sub channel feature can be used to set up multiple private groups within a single channel. When the sub channel 

feature is active, an inaudible code will be transmitted with the speech and only the receivers with the same sub channel 

setting will hear the transmission. However, if anybody is transmitting on the channel, all sub-channels will be busy during 

that time.  If the sub channel feature is switched off, all communication on a channel will be heard.  Press the (+) button 

(A:11) or (–) button (A:12) to select the sub channel. The LiteCom Plus headset supports Continuous Tone Coded Squelch 

System (CTCSS) and Digital Coded System (DCS) for a total of 121 frequencies/codes (see table below for sub channel # 

and the associated tone/code). To switch this function off press the (–) button when sub channel 1 is selected, or press the 

(+) button when channel 121 is selected. Press the (+) button to switch this function back on.  

Continuous Tone Coded Squelch System (CTCSS)

#

Tone

(Hz)

1

67.0

2

71.9

3

74.4

4

77.0

5

79.7

6

82.5

7

85.4

Digital Coded System (DCS)

#

DCS

39

023

40

025

41

026

42

031

43

032

44

043

45

047

46

051

47

054

48

065

49

071

50

072

51

073

52

074

#

Tone

(Hz)

8

88.5

9

91.5

10

94.8

11

97.4

12

100.0

13

103.5

14

107.2

#

Tone

(Hz)

15

110.9

16

114.8

17

118.8

18

123.0

19

127.3

20

131.8

21

136.5

#

Tone

(Hz)

22

141.3

23

146.2

24

151.4

25

156.7

26

162.2

27

167.9

28

173.8

#

Tone

(Hz)

29

179.9

30

186.2

31

192.8

32

203.5

33

210.7

34

218.1

35

225.7

#

Tone

(Hz)

36

233.6

37

241.8

38

250.3

#

DCS

53

114

54

115

55

116

56

125

57

131

58

132

59

134

60

143

61

152

62

155

63

156

64

162

65

165

66

172

#

DCS

67

174

68

205

69

223

70

226

71

243

72

244

73

245

74

251

75

261

76

263

77

265

78

271

79

306

80

311

#

DCS

81

315

82

331

83

343

84

346

85

351

86

364

87

365

88

371

89

411

90

412

91

413

92

423

93

431

94

432

#

DCS

95

445

96

464

97

465

98

466

99

503

100

506

101

516

102

532

103

546

104

565

105

606

106

612

107

624

108

627

#

DCS

109

631

110

632

111

654

112

662

113

664

114

703

115

712

116

723

117

731

118

732

119

734

120

743

121

754

EN

Summary of Contents for Peltor LiteCom Plus MT7H7A4610-NA


























Reviews: