background image

2

      WARNING

This hearing protector helps reduce exposure to hazardous noise and other loud sounds.    

Misuse or failure to wear hearing protection at all times when exposed to hazardous 

noise may result in hearing loss or injury.

 For correct use, consult supervisor, User 

Instructions or call 3M Technical Service. If your hearing seems dulled or you hear a ringing 

or buzzing during or after any noise exposure (including gunfire), or for any other reason you 

suspect a hearing problem, leave the noisy environment immediately and consult a medical 

professional and/or your supervisor.

3M™ PELTOR™ Tactical Earplug, TEP-200, Level Dependent Earplug, LEP-200

and Electronic Earplug, EEP-100 User Instructions
Introduction

Congratulations and thank you for choosing 3M™ PELTOR™ Communication Solutions!  

Welcome to the next generation of protective communication.

Intended Use

The TEP-200, LEP-200 and EEP-100 level dependent hearing protector helps provide hearing 

protection in noisy environments while enabling environmental listening in quiet environments.

Important 

Please read, understand, and follow all safety information in these instructions prior to use.  

Retain these instructions for future reference. For additional information or any questions, 

contact 3M Technical Services (contact information listed on the last page). For correct use, 

consult supervisor, consult User Instructions, or call 3M.

     WARNING

Failure to follow these instructions may result in serious injury or death:

a. Choking hazard – keep away from infants and small children.

b. If there is any drainage from your ear or you have an ear infection, consult a medical  

  professional before wearing earplugs.

c. Listening to music or other audio communication may reduce your situational awareness  

  and ability to hear warning signals. Stay alert and adjust the audio volume to the lowest  

  acceptable level.

d. To reduce the risks associated with igniting an explosion, do not use this product in a  

  potentially explosive atmosphere. 

Failure to follow these instructions

 may reduce the protection provided by the product 

and 

may result in hearing loss:

a. 3M strongly recommends individual fit testing of hearing protectors. If the NRR or SNR is  

  used to estimate typical workplace protection, 3M recommends that the noise reduction  

  value be reduced by 50% or in accordance with applicable regulations.

b. Ensure the hearing protector is properly selected, fit, adjusted, and maintained. 

 

Improper fit of this device will reduce its effectiveness in attenuating noise. 

  Consult the enclosed instructions for proper fit.  

c. Inspect the hearing protector before each use. If damaged, select an undamaged 

  hearing protector or avoid the noisy environment.  

d. The output of the electrical audio circuit of this hearing protector may exceed the daily   

  limit sound level. Adjust the audio volume to the lowest acceptable level.

e. Only use approved and compatible 3M™ PELTOR™ Communications Eartips.

Summary of Contents for PELTOR Electronic Earplug EEP-100













Reviews: