26
~ 10 sec
The ComTac™ VII will indicate pairing.
• 2 short beeps, indicates a successful pairing to the
SCU-300.
• 3 long beeps, indicates the NFMI link is lost. Press
and hold the On/Off/Menu button for a minimum of
10 seconds to reconnect the hearing protection.
Beep Beep
Beeeeep Beeeeep Beeeeep
5.5. TO CONNECT THE EXTERNAL RADIO TO
THE SCU-300
1. Power on the radio.
2. Ensure radio volume is set to a comfortable level.
3. Connect the cable to the radio. For instructions on how to
connect the radio, refer to the radio manual.
4. Align the markings on the cable to the markings on the
SCU-300.
IMPORTANT!
Make sure to select the correct socket on
the SCU-300 for the radio.
5. Connect the cable with the SCU-300 and turn the cable
clockwise to lock into place.
5.6. TO CONNECT AN EXTERNAL INTERCOM
TO THE SCU-300
1. Connect the cable to the intercom system. For instructions
on how to connect the intercom system, refer to the
intercom manual.
2. Align the markings on the cable to the markings on the
SCU.
IMPORTANT!
Make sure to select the correct socket on
the SCU-300 for the intercom system.
3. Connect the cable with the SCU-300 and turn the cable
clockwise to lock into place.
6. VOLUME
6.1. TO ADJUST THE AMBIENT
(ENVIRONMENTAL) VOLUME
The environmental microphones help the user to maintain
auditory situational awareness and communicate naturally in
lower noise environments.
• The + button and - buttons on the SCU-300 and RCU-300
adjust the Ambient (Environmental) Volume on the
TEP-300 and/or ComTac™ VII.
• Press the + button to increase the Ambient
(Environmental) Volume.
• Press the - button to decrease the Ambient
(Environmental) Volume. To mute the product, press
the - button on the SCU-300/RCU-300 until an audio
message indicates that product is in silent mode
“Ambient listening off”.
Note:
Volume control defaults to headset Ambient
(Environmental) Volume. To change the volume level on
connected devices, refer to section “6.2. To Adjust the radio/
intercom volume using the SCU-300 or RCU-300”.
Note:
When connected to an intercom system, this method of
changing ambient (environmental) headset volume will not be
available. In that case, it is necessary to enter the menu and
select Ambient Listening Volume to change the volume of
those devices.
EN
EN
Summary of Contents for PELTOR ComTac 7
