3M Multimedia Projector S20, Operator'S Manual, Page: 3 / 13

3
Example Of Computer Signal
Resolution
H
××
V
fH (kHz) fV (Hz) Rating Signal mode
Display
mode
720
×
400 37.9 85.0 VESA TEXT Zoom in
640
×
480 31.5 59.9 VESA VGA (60Hz) Zoom in
640
×
480 35.0 66.7 Mac13"mode Zoom in
640
×
480 37.9 72.8 VESA VGA (72Hz) Zoom in
640
×
480 37.5 75.0 VESA VGA (75Hz) Zoom in
640
×
480 43.3 85.0 VESA VGA (85Hz) Zoom in
800
×
600 35.2 56.3 VESA SVGA (56Hz)
800
×
600 37.9 60.3 VESA SVGA (60Hz)
800
×
600 48.1 72.2 VESA SVGA (72Hz)
800
×
600 46.9 75.0 VESA SVGA (75Hz)
800
×
600 53.7 85.1 VESA SVGA (85Hz)
832
×
624 49.7 74.5 Mac16"mode Zoom out
1024
×
768 48.4 60.0 VESA XGA (60Hz) Zoom out
1024
×
768 56.5 70.1 VESA XGA (70Hz) Zoom out
1024
×
768 60.0 75.0 VESA XGA (75Hz) Zoom out
1024
×
768 68.7 85.0 VESA XGA (85Hz) Zoom out
1152
×
864 67.5 75.0 VESA SXGA (75Hz) Zoom out
1280
×
960 60.0 60.0 VESA SXGA (60Hz) Zoom out
1280
×
1024 64.0 60.0 VESA SXGA (60Hz) Zoom out
1280
×
1024 80.0 75.0 VESA SXGA (75Hz) Zoom out
1280
×
1024 91.2 85.0 VESA SXGA (85Hz) Zoom out
1600
×
1200 75.0 60.0 VESA UXGA (60Hz) Zoom out
•
Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
•
Be sure to check jack type, signal level, timing and resolution before connecting this projector to a
computer.
•
Depending on the input signal, full-size display may not be possible in some cases. Refer to the
number of display pixels above.
•
Although the projector can display signals with resolution up to UXGA (1,600 x 1,200), the signal will
be converted to the projector’s panel resolution before being displayed. The best display
performance will be achieved if the resolutions of the input signal and projector panel are identical.
•
The image may not be displayed correctly when the input sync. signal is “Composite Sync.” or
“Sync. on G”.
•
Automatically adjustment may not function correctly with some input signals.
•
When the image resolution is changed on a computer, depending on an input, automatic adjust
function may take some time and may not be completed. In this case, you may not be able to see a
check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to
the original. It might be recommended to use other CRT or TFT monitors to change the resolution.
NOTE
16S10 TECHNICAl 03.9.24 5:06 PM ページ 3