Downloaded from Projector.com
3M
™
Multimedia Projector MP7760
22
© 3M IPC 2000
5-3. Battery Replacement
The remote control uses two AAA batteries. The battery cover is located on the back of the remote control.
1. Press the locking button to release door. (Figure 5-1)
2. Move the door to the right to remove it and set it to the side.
3. Remove old batteries.
4. Install new batteries. Make sure the polarity (+/-) on each battery matches the decal.
5. Replace battery compartment door.
Figure 5-1. Replacing Batteries
Section 5: Remote Control
245 IR~2.eps