© 3M 1997
3M
™
Multimedia Projector MP8640
3
Safeguards
WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Caution - Indicates a potentially hazardous situation which, if not avoided, could result in
minor or moderate injury. It may also be used to alert against unsafe practices.
2.
Close supervision is necessary when any appliance is used by or near children. Do not leave
appliance unattended while in use.
3.
Never look directly into the projector lens when the lamp is on. The metal halide lamp produces
a strong light which could damage your eyesight.
4.
Care must be taken as burns can occur from touching hot parts.
5.
Do not operate appliance with a damaged cord or if the appliance has been dropped or
damaged – until it has been examined by a qualified service technician.
6.
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
7.
If any extension cord is necessary, a cord with a current rating at least equal to that of the
appliance should be used. Cords rated for less amperage than the appliance may overheat.
8.
Always unplug appliance from electrical outlet before cleaning and servicing and when not in
use. Grasp plug and pull to disconnect.
9.
To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
10.
To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified
technician when service or repair work is required. Incorrect assembly can cause electric shock
when the appliance is subsequently used.
11.
Connect this appliance to a grounded outlet.
12.
Do not expose this projector to direct sunlight, or use it outside.
13.
Keep all ventilation openings free of any obstructions.
14.
Always open the lens shutter when the projection lamp is on.
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you operate and maintain your 3M MP8640
Multimedia Projector.
IMPORTANT SAFEGUARDS
1.
Read and understand all instructions before using.
Pay particular attention to areas where this
symbol is shown.
INTENDED USE
Before operating the machine, please read the entire manual thoroughly. The 3M
™
Multimedia
Projector 8640 was designed, built and tested for use indoors, using 3M
™
brand lamps and nominal
local voltages. The use of other replacement lamps, outdoor operation or different voltages has not
been tested and could damage the projector or peripheral equipment and/or create a potentially
unsafe operating condition.
