6
3M™ MicroTouch™ System SCT3nnnEX Integration Guide
3M Touch Systems, Inc. Proprietary Information
– TSD-19-278
Large form factor
Small form factor
Serial
EX122 series
EX142 (cased)
EX112 series
USB
EX121 series
EX141 (cased)
EX111 series
Each SCT sensor requires a touch controller. Refer to the appropriate
3M™
MicroTouch™ Controller EX Reference Guide
and the
3M™ MicroTouch™
MT 7
Software User Guide
for more information on your touch system. All technical
documentation is available from the 3M Touch Systems website at
3M Touch Systems is committed to being a premier supplier of touch systems throughout
the world. As a 3M Touch Systems customer, you are aware that we have strong internal
programs designed to meet or exceed environmental regulations of our customers and the
regions in which we conduct business.
What You Need to Know
This manual describes how to complete the following tasks:
•
Disassemble your display (if necessary)
•
Mount the sensor to the display
•
Install the touch controller
WARNING
To avoid the risk of electric shock which could result in serious injury or death:
You must be a qualified technician with experience in assembling and disassembling
different types of displays. You must know the specifics of your display and have
access to its documentation.
There may be hazardous voltages present in the display. If you do not understand
display electronics, you may injure yourself, damage the sensor, or damage the
controller.
Important Safety Information
Read and understand all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
Intended Use
The
3M™
MicroTouch™ System SCT3nnnEX Integration Guide
is intended to
instruct and guide you in the integration of a SCT EX Touch System into an existing
flat screen display. These sensors are intended for indoor use only and are not
designed for use in hazardous locations.
