6
3M™ Multi-Touch Desktop Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-40532B
By combining industry-leading multi-touch performance, vibrant high-definition
graphics, and wide viewing angles with a fully integrated, industrial-design desktop
device, the 3M Multi-Touch Desktop Displays clearly defines the next level of interactive
touch displays.
Important Safety Information
Read and understand all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
Intended Use
The 3M Multi-Touch Desktop Display was designed for touch input and tested to
replace an existing display. These displays are intended for indoor use only and are not
designed for use in hazardous locations.
Explanation of Signal Word Consequences
DANGER:
Indicates a potentially hazardous situation, which, if not avoided, will
result in death or serious injury and/or property damage.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.
NOTICE:
Indicates a potentially hazardous situation, which, if not avoided, may result
in property damage.
DANGER
To avoid the risk of fire and/or explosion which will result in serious injury or
death:
•
Do not install or use this product in a hazardous location.
WARNING
To avoid the risk of fire which could result in serious injury or death:
•
Do not remove the cover or back of the display.
To avoid the risk of electric shock which could result in serious injury or death:
•
Plug power cord into appropriate grounded power source.
•
Do not use a damaged power supply.
•
Do not use a power cord that is frayed or otherwise damaged.
•
Do not service the Flat Panel Display yourself. There are no user serviceable parts
inside. Refer all servicing to qualified service personnel.
•
Do not use non-conforming replacement parts.
•
Do not place wet or damp objects on the display.