24
EN
(English)
If the information entered
are correct, “
Your connection looks good!
”
will display.
If information entered does not allow the Luminometer to communicate with the Clean-Trace Desktop
Software
, “
There is a problem with the connection
”
will display, with suggestions to resolve.
e.
Setting Wi-Fi auto Synchronization Time
The
3M™
Clean-T
race™
LM1 Luminometer will automatically sent
all un-synchronized Test results present in Luminometer to the
Clean-Trace Desktop Software at the set
Wi-Fi auto-sync time
.
To set Wi-Fi auto-sync time:
▪
Get to the Settings screen
.
▪
Tap
[Wi-Fi auto-sync time]
.
▪
Use the Up and Down navigation keys or tap
or
to adjust the Wi-Fi auto Sync time.
▪
Tap
[Done]
to save or
[Cancel]
to skip.
If the 3M Clean-Trace
LM1 Luminometer is “
O
n”
and configured for Wi-Fi synchronization, The 3M Clean-Trace
Luminometer will automatically sent all Test results present on the device to the 3M Clean-Trace Desktop Software
at the Wi-Fi auto-sync time set. The Wi-Fi auto-sync will happen with no user intervention and will not interrupt any
user operation on the device.
