3M GMI PS200-LMP, Operation & Maintenance Manual, Page: 22 / 46

64220, Rev. 1/April 2019
3M™ GMI™ PS200-LMP AUTO BUMP/CALIBRATION STATION
PERFORMING A CALIBRATION/BUMP TEST
5-2
Figure 5-3: Locate Monitor on Gas Supply Nozzle
6. Push the monitor back until correctly seated in the ABC, as illustrated in
Figure 5-4: Monitor Cor-
rectly Seated
.
Figure 5-4: Monitor Correctly Seated
7. Close the front cover (as illustrated in
Figure 5-5: Close Front Cover
), then, using both thumbs,
press the lower edge corners of the cover firmly until the latch ‘clicks’ shut.
Gas
Supply
Nozzle