3M Filtrete FAP04 Instructions For Use Manual Download Page 7

Turning the Air Purifier On/Off:

• Ensure that the Air Purifier is plugged into a 120V AC outlet properly.

• Press the      ON/OFF button on either the Air Purifier or the

remote control to turn the Air Purifier on. 

• The previous operation of the Air Purifier is automatically stored and

will automatically be repeated when the purifier is restarted.

• Once the Air Purifier is on, pressing the     ON/OFF button on the Air

Purifier or remote control will turn the Air Purifier off.

Adjusting the Fan Speed:

• Once the Air Purifier is turned on, the fan speed 

can be adjusted to one of three settings.

• The fan speed is displayed on the controls display.

• Pressing the     SPEED button on either the Air Purifier or 

the remote control will step between the three 

fan speeds of Low/Medium/High.

• If the fan speed is set at either Low or Medium, pressing 

the     SPEED button will increase the speed 

to the next highest setting.

• If the fan speed is set at High, pressing the     SPEED 

button will decrease the fan speed to Low.

Running in Automatic Mode:

• Running in Automatic Mode allows the air quality sensor to control

the speed of the fan. The Air Purifier will run on higher speeds when

more gases or odors are detected and on lower speeds when fewer

gases or odors are detected. 

• To run in Automatic Mode, press the     AUTOMATIC MODE button

on either the Air Purifier or the remote control. The light beside the

Automatic Mode icon on the Air Purifier will illuminate when the Air

Purifier is running in Automatic Mode.

• The Air Purifier will also display the current fan speed 

while running in Automatic Mode.

• To turn Automatic Mode off, press the     FAN SPEED 

button to select a new speed.

Please note:

The air quality sensor takes several minutes to warm

up when the Air Purifier is first plugged in. During this time, the

Automatic Mode light on the Air Purifier will slowly flash. The light will

stop flashing when the air quality sensor 

is warmed up and ready for use.

10

Air Purifier Use

On/Off

Fan Speed

Automatic Mode

Night Light

Ionizer

Timer

Filter Timer Reset

Air Quality Sensor

9

Air Purifier Use

Read and understand the operating

manual before using the Air Purifier.

W a r n i n G

Summary of Contents for Filtrete FAP04











Reviews: