5
E. AFTER A DESCENT:
After use of the Emergency Descent Device, the auto retract function retracts the lifeline back
in the device under control. Depending on the slope of the application, it may be necessary to assist the Brake Trolley
back to the Descent Device. The Emergency Descent Device must be serviced by an authorized service center after a
descent as the result of an emergency.
3.3 INSTALL GUIDE CABLE SUSPENSION BARS:
See Figure 3.
Step 1.
Remove four 1/4-20 x 1-1/4 bolts.
Step 2.
Position suspension bars.
Step 3.
Install four 1/4-20 x 1-1/2 Bolts included in kit. Torque to 60 in lbs.
Figure 3 - Install Guide Cable Suspension Bars
1
1
1
1
2
3
3
3
3
3
2
3.4 CONNECT THE EMERGENCY DESCENT DEvICE TO AN ANCHORAGE:
Figure 4 illustrates connection of the
Emergency Descent Device to an anchorage. See Section 2 for compatibility and anchorage strength requirements.
DROPPED OBJECT PROTECTION:
The handle of the Emergency Descent Device can be connected to secondary
anchorage with a Tie-Off Adaptor to prevent dropping the device during installation on primary anchorage.
Figure 4 - Connection of the Emergency Descent Device to Anchorage
A
B
D
B
E
C
B
C
A
B
B
A
E
C
C
F
A
Anchorage Connector
B
Anchorage
C
Carabiner
D
Cable Lanyard
E
Tie-Off Adaptor
F
Dropped Object Protection
