background image

17

7.0 LABELS 

and MARKINGS

7.1 LABELS:

 Figure 15 illustrates product labels and their location on the harness. All labeling must be present and fully 

legible. Information on each label is as follows:

 

;

Label images are intended to be representative. Please refer to your product labels for specific information.

A

1) Warning Statement - Read all user instructions.

2) Harness Classification

B

1) User Identification

2) System Applications

C

1) Inspection Log

2) Serial Number

3) Date Manufactured 

4) Model Number

D

Warning: Increased free fall should be considered when using this product.

8.0 RFID 

Tag

8.1 LOCATION:

 3M product covered in these user instructions is equipped with a Radio Frequency Identification (RFID) Tag. 

RFID Tags may be used in coordination with an RFID Tag Scanner for recording product inspection results. See Figure 14 

for where your RFID Tag is located.

8.2 DISPOSAL:

 Prior to disposing of this product, remove the RFID Tag and dispose/recycle in accordance with local 

regulations. For more information, please visit our website: 

http://www.3M.com/FallProtection/RFID

9.0  GLOSSARY OF TERMS

9.1 DEFINITIONS:

 The following terms and definitions are used in these instructions.

 

;

For a comprehensive list of terms and definitions, please visit our website: 

www.3m.com/FallProtection/ifu-glossary

• 

AUTHORIZED PERSON:

 A person assigned by the employer to perform duties at a location where the person will be exposed to a fall 

hazard.

• 

COMPETENT PERSON:

 One who is capable of identifying existing and predictable hazards in the surroundings or working conditions 

which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to 

eliminate them.

• 

FALL ARREST SYSTEM:

 A collection of Fall Protection equipment configured to protect the user in the event of a fall.

• 

QUALIFIED PERSON:

 A person with a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, 

and experience has successfully demonstrated their ability to solve or resolve problems relating to Fall Protection and Rescue systems to 

the extent required by applicable national, regional, and local regulations.

• 

RESCUE SYSTEM:

 A collection of Fall Protection equipment configured to remove a person from hazards to a safe location. No free fall is 

permitted.

• 

RESCUER:

 A person using the Rescue system to perform an assisted rescue.

• 

RESTRAINT SYSTEM:

 A collection of Fall Protection equipment configured to prevent the user from reaching a fall hazard. No free fall is 

permitted.

• 

USER:

 A person who performs activities while protected by a Fall Protection system.

• 

WORK POSITIONING SYSTEM:

 A collection of Fall Protection equipment configured to support a user at a work position.

Summary of Contents for DBI SALA EXOFIT X300









































Reviews: