3M DBI SALA EXOFIT STRATA 1112475 User Instructions Download Page 5

5

 

;

Before using this equipment, record the product identification information from the ID label in the “Inspection and 

Maintenance Log” at the back of this manual.

Table 1 - Product Specifications

System Specifications

Standards:

Each product model is certified to, or conforms with, the applicable standards and 

regulations listed within Figure 1. If none are listed within Figure 1, then each one listed 

on the cover applies.

Component Specifications

Figure 1 

Category

Figure 1 

Reference

Description

Materials

Attachment 

Elements

1

Dorsal D-ring

Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength

2

Sternal D-ring

Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength

3

Hip D-rings

Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength

4

Shoulder D-rings

Aluminum alloy - 22.2 kN (5,000 lbf) Tensile Strength

Buckles and 

Adjusters

5

Tri-Lock Buckles

Alumimum alloy, stainless steel, and alloy steel - 18 kN (4,000 

lbf) Tensile Strength

6

Duo-Lok Quick Connect Buckles

Alumimum alloy, stainless steel, and alloy steel - 18 kN (4,000 

lbf) Tensile Strength

7

Tongue Buckles

Alumimum alloy, stainless steel, and alloy steel - 18 kN (4,000 

lbf) Tensile Strength

8

Revolver Adjusters

Aluminum alloy, stainless steel, alloy steel, and nylon - 18 kN 

(4,000 lbf) Tensile Strength

Other Elements

9

Suspension Trauma Straps

Polyester webbing on polyester thread

10

Lanyard Keeper

Injection-molded nylon

11

EZ-Link System

Aluminum alloy, alloy steel - 22.2 kN (5,000 lbf)

Pads

12

Back and Shoulder Pad

Blend of nylon and polyester

13

Leg Pads

Blend of nylon and polyester

Additional Materials

Description

Materials

Webbing

Polyester - 27 kN (6,000 lbf) Tensile Strength

Stitching

Polyester thread on polyester webbing

Label Covers

Blend of nylon and polyester

Performance Specifications

Maximum Free Fall Distance:

See the instruction manual of your connecting subsystem for more information on Maximum Free Fall 

Distance requirements.

Maximum Arresting Force:

See the instruction manual of your connecting subsystem for more information on Maximum 

Arresting Force requirements.

Maximum Harness Stretch:

1.5 ft. (45.7 cm)

Summary of Contents for DBI SALA EXOFIT STRATA 1112475





















Reviews: