Personal Safety Division
3M Center, Building 235-2W-70
St. Paul, MN 55144-1000
3M PSD products are
occupational use only.
© 3M 2017. All rights reserved.
3M is a trademark of of 3M Company
and its affiliates.
Used under license in Canada.
All other trademarks are property
of their respective owners.
Please recycle. Release 1, October 2017
In United States of America
Technical Service:
1-800-243-4630
Customer Service:
1-800-328-1667
3M.com/workersafety
In Canada
Technical Service:
1-800-267-4414
Customer Service:
1-800-364-3577
3M.ca/Safety
IMPORTANT SAFETY INFORMATION
For 3M™ Filtering Facepiece Respirators Being Used by the General Public for Cleanup Activities from Natural
Disasters.
(Keep this bulletin for future reference.)
WARNING
!
Filtering facepiece particulate respirators are intended to help reduce breathing in airborne particles such as dust. If you
do not follow all instructions and limitations on the use of the respirator and/or do not wear the respirator during all
times of exposure to the airborne particles the respirator may not be as effective. The respirator cannot stop the
breathing in of all particles in the air and does not eliminate the risk of symptoms or sickness.
Misuse may result in
sickness or death.
For correct use of a respirator, consult the supervisor and
User Instructions
, or call 3M in the U.S.A.
at 1-800-247-3941.
IMPORTANT
If you have pre-existing lung disease such as asthma or emphysema, underlying heart disease such as heart failure or other health conditions,
you may have difficulty breathing through some respirators and should consult your healthcare provider before use.
Standards regulating respirator training for the general public have not been established. For your respirator to help reduce the number of
particles you breathe, you must read and follow this bulletin.11
Considerations for Use
3M™ Particulate Filtering Facepiece Respirators N95 are intended to cover the nose and mouth of the wearer to help reduce wearer
exposure to airborne particles.
1. Select the Right Respirator
• 3M respirators are adult size respirators. To determine if the respirator fits you, follow the fitting instructions included with the respirator.
Always check your fit when you wear it.
• 3M respirators are certified by the National Institute for Occupational Safety and Health (NIOSH). For more information on NIOSH
certification see the NIOSH approval label included in the packaging.
2. When to Wear Your Respirator
• To be most effective, the respirator must be worn whenever you are exposed to the particles to which you wish to reduce your exposure.
3. Use it Correctly
• Although respirators can help reduce the number of particles you breathe, they will not eliminate the risk of symptoms or sickness.
• Do not alter, abuse or use this respirator other than as stated.
4. Prepare Yourself
• Practice putting on the respirator before you enter the contaminated the area.
• Anything that comes between the respirator and your face will make the respirator less effective by interfering with its fit.
• Men should shave every day that they may use the respirator. Hair, jewelry and clothing should not be between your face and the
respirator.
• Wash your hands thoroughly with soap and water, or use hand sanitizer, before handling the respirator.
5. Inspect Your Respirator
• Inspect respirator for holes, tears or other damage to surfaces, straps, metal nose strip and nose foam. If your respirator has
been damaged – DO NOT USE IT. Get a new one.
6. How to Wear
• Follow the fitting instructions included with the respirator. Fitting instructions are also available on 3M’s website
.
7. When to Replace
• Go to a clean, safe area, and replace your respirator if it is damaged, or if it becomes harder to breathe through.
• You should never wash, disinfect, reuse or share your respirator with others.
8. Do Not Use
• Do not use filtering facepiece particulate respirators for gases and vapors, areas with low oxygen levels, asbestos, lead, large areas of
mold and other hazardous substances. Hire a contractor and/or contact your local health authority.
For additional Information see
www.3M.com/workersafety
or call 3M at 1-800-247-3941.
DISTRIBUTED BY:
Pro Wood Finishes
14622 Southlawn Lane
Rockville MD 20850
Ph: (301) 424-3033
