3
Release the MESSAGE SELECT number button after the message has ended. The MESSAGE SELECT light
will begin blinking after 12 seconds of recording. (This indicates three seconds of recording time remaining.)
3. Monitoring
Recorded
Messages
•
To Listen to Recorded Messages through the internal speaker only:
Press the MODE button until the MONITOR light comes on.
Press the desired MESSAGE SELECT number buttons.
Press the PLAY NOW button. The messages will be heard through the A300 internal speaker, but not at the
menu speaker.
Press the CANCEL button to immediately stop the message.
4. Playing
Messages
•
To Begin Playing Messages Automatically at the Menu Speaker (triggered by a vehicle detector):
Press the MODE button until the PLAY light comes on.
Press the desired MESSAGE SELECT number button. Multiple messages can also be selected. They will be
played in ascending order to the outside speaker each time a vehicle enters the drive-thru area. There will be no
pause between multiple selected messages. If a message is still playing when the vehicle leaves the drive-thru
area, the message will stop and the A300 will be reset for the next vehicle.
•
To Change to Another Pre-Recorded Message:
Press the desired MESSAGE SELECT number button. Multiple messages can be selected or deselected by
observing the indicator lights.
•
To Alternate Messages:
Press the ALTERNATE MESSAGES ON button. Multiple messages must be selected for the ALTERNATE
MESSAGES light to come on. A different message will play each time a vehicle enters the drive-thru area.
•
To Play Messages Manually:
Press the desired MESSAGE SELECT number buttons.
Press the PLAY NOW button. This will play the selected messages at the menu speaker one time only. The
PLAYING status light will come on and remain on until the messages are completed.
5. Stopping
Messages
•
To Stop Playing Messages Automatically:
Press the MODE button until the STANDBY light comes on. If a message is currently playing, it will finish. No
more messages will be triggered.
Press the MODE button until the PLAY light comes on to resume playing messages automatically.
•
To Stop Playing a Manually Started Message:
Press the CANCEL button. The message will immediately stop.
6. Additional Operator Controls
•
To Delay the Start of Messages:
Press the "MESSAGE DELAY" ON button. The MESSAGE DELAY light will come on. Automatically
triggered messages will be delayed for an internally preset time. Press the MESSAGE DELAY button a second
time to cancel the delay.
•
To Lower the Volume of the Outside Speaker for Night Time Use:
Press the DAY/NIGHT button to decrease the volume to the menu sign speaker at night. The NIGHT status light
will come on and remain on until the DAY/NIGHT button is pressed again.
