3M 3M-Matic 8000a, Instructions And Parts List

Page: 28 / 176

NA - ENG
April 2016
3M-Matic ™ 8000a-8000a3
Page 16
Figure 5-4
5.1 Shipment and Handling of
Packed Machine
- The machine is fi xed on the
pallet with four (4) bolts and can
be lifted by using a fork truck.
- The package is suitable to travel
by land and by air.
- Optional sea freight package is
available.
Packaging Overall Dimensions
(Figure 5-1)
See Speci fi cations.
During the shipment it is possible
to stack a maximum of 2 machines
(Figure 5-2).
5.2 Packaging for Overseas Shipment
(Optional - Figure 5-3 )
The machines shipped by sea freight
are covered by an aluminum/
polyester/polythene bag which
contains dehydrating salts.
5.3 Handling and Transportation of
Uncrated Machine
The uncrated machine should not
be moved except for short distances
and indoors ONLY. Without the
supporting pallet, the machine is
exposed to damage and may cause
injuries. To move the machine use
belts or ropes, paying attention to
place them in the points indicated
using care to not interfere with the
lower taping head (Figure 5-4).
5.4 Storage of the Packed or
Unpacked Machine
If the machine is not used for a
long period, please take the
following precautions:
- Store the machine in a dry and
clean place.
- If the machine is unpacked it is
necessary to protect it from dust.
- Do not stack anything over the
machine.
- It is possible to stack a maximum
of 2 machines
(if they are in their original packing).
5. Shipment-Handling-Storage-Transport
H
L
W
H
L
W
Figure 5-1
Figure 5-2
Figure 5-3