3M 3M-MATIC 8000a-T, Instructions Manual

Page: 47 / 178

33
Figure 13-5 Removing Taping Heads From Case Sealer
13.11.2 Taping Heads (Refer to Figure 13-5A, 13-5B, and 13-5C)
1. Loosen, but do not remove, the two (2) retaining screws that secure the upper taping head shown -
Figure 13-5A.
2. Hold upper taping head applying and buf fi ng arms from under upper assembly, slide head forward and down to
remove
Figure 13-5B
.
3. Lift the lower taping head, shown in
Figure 13-5C,
straight up to remove it from the case sealer bed.
4. Refer to Manual 2 (Taping Head), See "Adjustments – Changing Tape Leg Length" for taping head set-up.
13-MAINTENANCE AND REPAIRS
(continued)
Tape Web Alignment – Manual 2
Tape Drum Friction Brake – Manual 2
Applying Mechanism Spring – Manual 2
One Way Tension Roller – Manual 2
Tape Leg Length
Leading Tape Leg Length Adjustment – Manual 2
Changing Tape Leg Length from 70 to 48mm [2-3/4 to 2 inches] – Manual 2
Note –
Changing tape leg to 48mm [2 inches] requires machine adjustment also. See Manual 2 or 3
"Special Set-Up Procedure – Changing Tape Leg Length".
Taping Head Adjustments
•
To reduce the risk associated with sharp blade hazards:
− Keep hands and fi ngers away from tape cutoff blades under orange blade guards.
The blades are extremely sharp
2014 June
8000a-8000a3 - NA
A
WARNING
C
B