manualshive.com logo in svg

3M 3M-Matic 700a, Instructions And Parts List, Page: 85 / 122

Share
Download
3M 3M-Matic 700a Instructions And Parts List Download Page 85

3

Taping Head Contents  

 

AccuGlide

™

 3 High Speed 2 Inch Upper and Lower Taping Heads consist of:

Qty. 

Part Name

 1 

Taping Head Assembly

 1 

Tape Drum and Bracket Assembly

 1 

Hardware and Spare Parts Kit

 1 

Threading Tool

The manual is an important part of the machine; all information contained herein is intended to enable the equip-
ment to be maintained in perfect condition and operated safely.  Ensure that the manual is available to all opera-
tors of this equipment and the manual is kept up to date with all subsequent amendments.  Should the equipment 
be sold or disposed of, please ensure that the manual is passed on with the machine.

Electrical and pneumatic diagrams are included in the manual.  Equipment using PLC controls and/or electronic 
components will include relevant schematics or programs in the enclosure (or will be delivered separately as 
needed)

Keep the manual in a clean and dry place near the machine.  Do not remove, tear or rewrite parts of the manual 
for any reason.  Use the manual without damaging it.  However, if the manual has been lost or damaged, ask your 
after sale service for a new copy (if it is possible, please have the manual name, part number, and revision infor-
mation and/or model/machine name,  machine type, and serial number) that are located on the identi

fi

 cation plate 

(For example:  Model 200a - Accuglide 3 - 2"  - Type 10800 - Serial Number 13282).

Note:

All the important warning notes related to the operation of the machine are identi

fi

 ed by  the symbol:

Updating the Manual

Modi

fi

 cations to the machine are subject to manufacturer's internal procedures.  The user may receive pages or 

parts of the manual which contain amendment made after its 

fi

 rst publication.  The user must use them to update 

this manual.

This instruction manual covers safety aspects, handling and transport, storage, unpacking, preparation, installa-
tion, operation, set-up  and  adjustments, technical and manufacturing speci

fi

 cations, maintenance, troubleshoot-

ing, repair work and servicing, electric diagrams, warranty information, disposal (ELV), a glossary with a de

fi

 nition 

of symbols, plus a parts list of the 3M-Matic

™

 Accugllide 3 (2 inch) 3M Industrial Adhesives and Tapes Division 

3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition January 2012/Copyright 3M 2012. All rights 
reserved  The manufacturer reserves the right to change the product at any time without notice.

How to use this Manual 

 

 

General Information   

 

AccuGlide 3 - 2" - NA

2012 January

Summary of Contents for 3M-Matic 700a



























































































































Reviews:

No comments