PG
10
PG
10
PG
11
To UNLOCK , Press MENU.
Touch and hold icon for 5 seconds for 2 bars (if not there already).
Then touch and hold the icon for another 5 seconds. Each 5 second touch and hold must be separate.
Return
HOME
by touching the
icon.
CALIBRATE
Your thermostat was accurately calibrated at the factory to ±1° F of actual ambient
temperature. You do have the option, however, to change the display temperature to match that of a
previous thermostat, or to match another thermostat already in your home. The range of change is from
-6°F to +6°F or -3°C to +3°C.
To change your Thermostat Calibration,
touch
MENU
and then touch
CALIBRATE.
Use the + / - to adjust the displayed temperature up or down, as desired.
The DELTA FACTOR that appears on the screen will also automatically increase or decrease for
each 0.5° (F or C) adjustment so you can see your change. The large display will show the modified
temperature reading that will be displayed on the HOME screen and used as the new room temperature.
Press
HOME
to return to the Home screen.
DIFF
(Used for 2 stage normal or heat pump with auxillary only, not on screen for single stage).
The differential is the number of degrees between the room temperature and the Target Temperature at
which the 2nd stage will be used. Default is 2°F.
Touch
MENU
and then
DIFF
. use the arrows to set the
DIFF
.
Recommend
DIFF
be set to 2°F for very cold climates and to 4°F for warm climates.
