3M 29100, Instructions And Parts List

Page: 27 / 39

23
Replacement Parts – Illustrations and Parts Lists
HST 3-Inch Taping Head Assemblies, Type 29100
1. Refer to Taping Head Assemblies figure to find all the parts illustrations identified by figure numbers.
2. Refer to the figure or figures to determine the individual parts required and the parts reference number.
3. The replacement parts list, that follows each illustration, includes the part number and part description
for the parts in that illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally,
should the customer elect to do so.
4. Refer to first page of this instruction manual for parts ordering address and/or phone/fax number.
IMPORTANT – Not all the parts listed are normally stocked items. Some parts or assemblies shown
are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confirm item
availability.