International - ENG
February 2021
3M-Matic
™
7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page 14
Source
Document
for
all
related
Manuals/Translations
44-0009-2164-1 / ECO# 0078045
A Standard Pos. B Alternate Pos. C Fully Raised Pos.
Length Width
AG 3 Tape Leg
AG 3 Short T
LHB Tape Leg
(i.e. 2.75" [70])
(i.e. 2.0" [50])
(i.e. 1.38" [35])
Minimum 6" [152] 6.5" [165]* 4.5" [114]
1.5" [38]
12.25" [311]
Maximum N/A
26" [660]
28" [711]
25" [635]
35.5" [601]
4. Specifications
(continued)
4.4 Machine Noise Level
(measured at workplace)
:
Under Load
Idling
Weighted emission sound pressure level/workplace
81,2db
68 .0db
Uncertainty
3db
3db
A-Weighted sound power level
92,6db
79,4db
Uncertainty
3db
3db
Hearing Protection Recommended
Note:
Noise levels will vary and are dependent on the pressure sensitive tape used inthe
application. The sum of measured value of noise plus its associated uncertainty represents an upper
limit of range of values. Idling refers to machine running in rest position (no boxes). Under Load
refers to machine running and box taping using adhesive tape 3M-Scotch 75mm (3”) Accuglide -
Bottom Taping Head.
4.5 Set-Up Recommendations:
• Machine must be level.
• Observe Center of Gravity when lifting and moving machine.
• Avoid floor with greater than 10 degree slope.
• Customer supplied optional infeed and exit conveyors (if used) should provide straight and
level box entry/exit.
• Optional exit conveyor (powered or gravity) can help move sealed boxes away from machine.
Powered exit conveyor should match belt speed of case sealer.
4.6 Tape
- Scotch® pressure-sensitive film box sealing tapes.
4.7 Tape Width -
50mm [2 inch] minimum to 72mm [3 inch] maximum.
4.8 Tape Roll Diameter
Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of
Scotch
®
film tapes)
4.9 Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See “Removing Taping Heads Procedure – Changing the Tape Leg Length”)
4.10 Box Board
Style – regular slotted containers – RSC. 125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.
23-44 lbs. per inch of width Edge Crush Test (ECT).
4.11 Box Weight and Size Capacities
A. Box Weight, filled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support flaps.
B. Box Dimensions for 7000a and 7000a3 Machines: Inches [mm]
* Boxes narrower than 10 inches [250mm] may require more frequent belt replacement
because of limited contact area.
