SM3G III
User’s Manual
16
3.1.2 LAN
These are the settings of the LAN (Local Area Network) interface for the router. The router's local
network (LAN) settings are configured based on the IP Address and Subnet Mask assigned in this
section. The IP address is also used to access this web-based management interface. It is
recommended that you use the default settings if you do not have an existing network.
IP Address:
The IP address of your router’s LAN port. Default: 192.168.0.254.
Subnet Mask:
Subnet Mask of your LAN (default: 255.255.255.0). All devices on the network
must have the same subnet mask to communicate on the network.
DHCP Type:
DHCP stands for Dynamic Host Configuration Protocol. The DHCP section is
where you configure the built-in DHCP Server to assign IP addresses to the computers and
other devices on your local area network (LAN).
When you select
Server
item from this
pull-down list to enable this function, the following parameters will be displayed. You must enter
the IP address, Subnet Mask, Primary DNS Server and/or Secondary DNS Server.
